Concrete Foundations & Footings

Why Foundation Quality Matters

Your foundation is the most important part of any structure. If the foundation fails, everything above it is at risk. Poor foundation work leads to cracked walls, sticking doors and windows, uneven floors, and structural damage that costs thousands to repair. Proper foundation installation prevents these problems and gives your building a stable base for decades.

We follow engineering specifications and local building codes for every foundation project. Our experienced team excavates to the correct depth (below the frost line and into stable soil), installs proper reinforcement, and pours concrete to the specified strength. We also make sure footings are wide enough to distribute the load and prevent settling. Every step is done with precision because your building depends on it.

Types of Foundations We Install

Different structures need different foundation designs. Here are the most common types we install:

• •Strip Footings: Continuous concrete supports under load-bearing walls
• •Pad Footings: Square or rectangular concrete pads under posts and columns
• •Slab-on-Grade: Integrated foundation and floor slab for garages and additions
• •Stem Wall Foundations: Raised foundation walls on top of footings
• •Pier Foundations: Deep concrete piers for hillside or unstable soil conditions
• •Fence Post Footings: Individual concrete bases for fence posts and gates

We work with engineers and building inspectors to make sure your foundation design meets all requirements for your specific project and location.

Our Foundation Installation Process

Foundation work requires careful planning and execution. Here is how we approach every project:

We start with a site evaluation and review of building plans or engineering drawings. We mark the location of all footings and excavate to the specified depth, making sure we reach stable soil. In some cases, we may need to go deeper to get below the frost line or reach solid ground. We set forms to the correct dimensions and install rebar or other reinforcement according to engineering specifications.

When we pour the concrete, we use high-strength mixes designed for structural use. We make sure the concrete is placed properly, consolidated to eliminate air pockets, and finished level. After the pour, we allow proper curing time before removing forms and proceeding with construction above. Our slab installation experience ensures proper base preparation, and our masonry work helps us build foundation walls that integrate seamlessly with footings.

Local Code Compliance

Foundation work in Pittsburg requires permits and inspections. Building codes specify minimum footing depths, widths, concrete strength, and reinforcement requirements based on soil conditions and building loads. We handle the permit process and coordinate inspections to make sure your foundation meets all local requirements.

Working with inspectors ensures your foundation is built correctly and your project stays on track. We welcome inspections because they verify that our work meets professional standards. That gives you confidence in the quality of your foundation and protects your investment.